How-To Root HTC Wildfire S Easily?

Today, we will provide you guide or tutorial on How to root HTC Wildfire S. It is one of the best smartphones by company. It has been a long time that this smartphone made debut.

Though the hardware features are good to make it stand with the smartphones of present. But the software, the Android version has gone very old and we need to root HTC Wildfire S Android Smartphone.

If you own this smartphone, then you don’t need to panic, as rooting is solution of old version of Android in your HTC Wildfire S.

Root HTC Wildfire S
Easy guide on rooting your HTC Wildfire S Smartphone

Why to Root HTC Wildfire S ?

Rooting is required to install custom ROM on your Android device. It gives you the hidden powers, and thus allows you to use your Android device without any limit.

Rooting is simple task, but only then, if you learn it from an easy-to-understand tutorial. Check out the simple tutorial on rooting your HTC Wildfire S.


If you have done rooting on any Android device ever before, then you might be familiar with the risks involved in it. The process may lead to damage of your Android device, and data wipe up. Try the process at your own risk. Don’t blame us for any unpleasant happening.

Prerequisites to Root HTC Wildfire S :

  • Your HTC Wildfire S’s battery must be charged to at least 60 percent.
  • Back up of data is an important and wise step to do, before starting the rooting process.
  • Make sure the bootloader of your HTC Wildfire S is unlocked. If it is not, then you need to do it. This is simple to do. Check out the process for this here.
  • USB Debugging Mode must be enabled for the process. You can enable it by going to the Settings section of your HTC Wildfire S. Then Applications>Development, and these check the box that reads ‘Enable USB Debugging Mode’.


How to Root HTC Wildfire S Easily (Step-By-Step Guide)

  • Download a file named Download it from this link.
  • You also need to download Root Script. Download it from this link.
  • Use the USB cable to connect your HTC Wildfire S with your PC/Laptop. Now transfer both these downloaded files from there to SD card of your HTC Wildfire S before rooting.
  • Restart your HTC Wildfire S in HBoot Mode. Press the Volume and Power buttons till you see the HBoot Screen.
  • A message of Apply Update will be popped up soon. When it happens, press the Volume Up key.
  • The update will get started, and once it is done, press the Power button to restart your device.
  • The use of the file downloaded first is done. Now only second file, the only is important for us.
  • Again restart your HTC Wildfire S to HBoot Mode. Yeah, by the same procedure.
  • Volume Keys are used to navigate through the options in HBoot screen. Navigate to option Enter into Recovery Mode.
  • Navigate to Install Zip from SD card. There, select the option Zip file from the SD card. Here you need to locate the file that you downloaded in the second step. The file.
  • Confirm the file by tapping ‘Yes‘. The rooting process of your mobile will get initiated. Just wait for few minutes.
  • Your HTC Wildfire S will restart once the rooting is done.


Your HTC Wildfire S has been rooted successfully. If you have faced any type of problem while rooting HTC Wildfire S then please do comment and let us know the issues, we will get to you soon. Till that time please do share this article as well as check out other posts on our blog. Good Bye!

[Tutorial] How To Upgrade Samsung Galaxy S2 to Android 4.1.2 Jelly Bean

The users of the Samsung Galaxy S2 (GT-I9100G) can update their devices to Android 4.1.2 Jelly Bean (I9100GXXLSR) through Samsung Kies or by using OTA (over-the-air) updates. In case they face difficulties while updating via these two ways, there is also a manual process which is explained below.

Note – This tutorial is only for Samsung Galaxy S2, model number GT- I9100G. Proceed at you own risk, TechZune will not be responsible for anything that goes wrong.

Also, we do make sure that nothing wrong will happen if you are following each and every step correctly!


Things to keep in mind before upgrading using the manual method:

  • You must have a proper backup of your data
  • Ensure that your Samsung Galaxy S2 is fully charged
  • You must have the USB drivers for your device installed on your computer
  • USB Debugging must be enabled
  • After flashing the firmware, you will lose custom ROMs such as CM10, Paranoid Android or AOKP installed in your device
  • You will also lose custom recovery such as ClockworkMod Recovery or TWRP Recovery if you have any
  • After installing it on your Galaxy S2, you will lose root if you have any
  • This tutorial uses Odin that only works on Windows. For other platforms like Linux and Mac OS, the users have to use cross platform tool Heimdall to flash this firmware.

Steps To Upgrade Samsung Galaxy S2 to Android 4.1.2 Jelly Bean:

Step 1: Download Android 4.1.2 Jelly Bean (I9100GXXLSR) for Samsung Galaxy S2 (GT-I9100G) and extract the file.

Step 2: Download Odin 3.07 and extract the file.

Step 3: Power off Galaxy S2 and put it on the Download Mode. To do this, press and hold the Volume Down and Home buttons while pressing the Power button until the Samsung Galaxy logo appears on the screen.

Step 4: Run Odin 3.07.exe as an Administrator.

Step 5: Connect Galaxy S2 to your computer via the USB cable. If the device is connected properly, one of the ID:COM boxes will turn yellow with the COM port number.

Step 6: Select the following files in the Odin at relevant tabs from extracted I9100XWLS8 firmware folder:

  • Click on PDA and select the .tar file with CODE in its name
  • Click on Phone and select file with MODEM in its name (Ignore this step if there is no such file)
  • Click on CSC and select file with CSC in its name (Ignore this step if there is no such file)
  • Click on PIT and select the .pit file. Use this file only if you get it while extracting the zip file mentioned in step 1 or else just ignore it

In case the extracted zip files don’t have any modem, CSC or pit file, it means that you don’t require them. It’s the file with .tar.md5 extension that is a must have and should be flashed through PDA section

Step 7: In the Odin, ensure that Auto Reboot and F. Reset Time checkboxes are selected. In addition, if you are using a .pit file, ensure that re-partition checkbox is selected.

Step 8: Click on the Start button to begin the flashing process.

Step 9: Once flashing is done, you will see a PASS message with a green background in the left-most box at the top of the Odin.

The device will now restart on its own. After you get the Samsung logo on the home screen, unplug the device from the computer. You are done!

How to De-index WordPress Categories and Tags From Google using Webmaster Tools

If you are facing a problem that Tags and Categories of your WordPress blog are getting indexed, despite of having noindex on Tags and categories pages. There is no need to worry about this problem. This is one of the common indexing issue where Google indexes few pages from your blog and despite of adding noindex tag, such pages are part of Google. This is normal and as soon as Google will re-crawl your site, it will respect the noindex tag and will de-index such part of your Blog. This may take some time but here are few things which you can do to speed up the process.


Make sure your Robots.txt is not blocking access to tags and categories pages because if few of your pages are already indexed in Google and you have added noindex tag and also stopped crawling of that part of your site, Google may not re-crawl particular section of your site and will never see noindex tag. Robots.txt exclusion is useful for parts like Wp-admin and Wp-content. It is not good to block the pages like tags and categories using robots.txt because it hamper the crawling of your deeper page. The best way to stop indexing is adding noindex tag, which you can easily do by using WordPress SEO by yoast or meta robots plugin.

You can check what pages of your sites are indexed in Google by typing in Google search.
Usually our tags and categories pages are seen as directory from search point of view. For example:
We should use the directory removal option to remove the complete directory in one go.

Steps to De-index WordPress Categories and Tags From Google using Webmaster Tools

  • Login to Google Webmaster tool
  • Site dashboard > Optimization > Remove URL’s
  • Add and and select Remove directory option.
  • Hit submit request, all categories and tag pages will be out of Google index within 24-48 hours of removal request.


Note: Make sure you use the noindex option for tags and categories pages in WordPress SEO by yoast or Meta robots plugin so that it never get indexed again.

I hope this solution will help you! feel free to share this post and help others too 🙂